My Blackstone 36-in Culinary Omnivore (model 2162) has a convenient tray in the front.
I like to keep two squirt bottles in the tray. One for water, and one for oil.
On the inside, the tray is titled towards the front about 25 degrees so the bottles are unsteady.
They kept falling over and leaking, making an oily mess.
This insert holds two bottles up to 60 mm in diameter in a nearly vertical position.
There is a 5 degree tilt towards the front so taller bottles don't hit the knobs.
The holders have drainage holes in the bottom and keep the bottles secure. No more mess.
I designed this to fit loosely in my tray because sheet metal bends are not perfect.
I included two relatively large fillets on the bottom edges to avoid any irregularities in the bends.
I printed the insert on its bottom with no supports. And as you can see in the photo above, the bridges on the bottom fillets are a bit stringy. This didn't bother me since I can't see it and it doesn't affect the structural integrity. But you may want to use supports or select a different print orientation.
| Blackstone_Squirt_Bottle_Tray.stl | 2.7MB | |
| Blackstone_Squirt_Bottle_Tray_0.4n_0.2mm_PETG_MK4IS_4h56m.bgcode | 7.7MB |
