Black Series Rex Helmet Cover Plate 3D Printer Model
The file 'Black Series Rex Helmet Cover Plate 3D Printer Model' is (stl) file type, size is 153.2KB.
The file 'Black Series Rex Helmet Cover Plate 3D Printer Model' is (stl) file type, size is 153.2KB.
I designed this cover plate to convert my Black Series Captain Rex helmet to the Rebels Old Man Rex version. The old man Rex version does not have the range finder and has the same cover plate as on the left side. This will require permanent modifications to your helmet that are not reversible. You will have to separate the range finder arm from the base plate. When you do, the internal grey “latching” plate will have to be glued to the white base, since the retaining screw can no longer be used. This grey plate is what allows the white base to be attached to the helmet. You will also have to grind off the two white ridges on the white base so that it is flush. Then you will be able to glue my plate to the white base, and it will look exactly like the other side. Hope you like it. Please give any feedback if you feel it can be improved. Please also share you finished product as a Make.
V2. Has a hole in the middle that matches the base in case you want to use for magnets or whatever.
V3. Does not have the hole and is completely flat underneath.
| Black_Series_Rex_Helmet_plate_v2.stl | 392.3KB | |
| Black_Series_Rex_Helmet_plate_v3.stl | 372.2KB |
