The file '***BL4CK_BEAUTY*** – 3D Printer – UM2C Clone – CL260 Like – Cube – CoreXY – Ultimaker 3D Printer Model' is (stl,txt) file type, size is 2.9MB.
Hey,
i was inspired by "El Chepo" here on Thingiverse and decided to pick some ideas and create my own Cube. It´s for 340 / 500 2020 Aluminium Extrusion and 8mm/12mm smooth rods.
config file is also online
Any further questions - just ask in the comments :)
BOM (not 100%)
FRAME and CARRIAGE
8x 2020 MISUMI 340mm
2x 2040 MISUMI 340mm
4x 2020 MISUMI 500mm
2x 2020 MISUMI 230mm (carriage)
2x 2040 MISUMI 230mm
SMOOTH RODS
4x 12mm MISUMI Rods 500mm (Z-Axis)
2x 8mm MISUMI Rods 380mm (XY-Axis - non-motor-mount-side)
2x 8mm MISUMI Rods 400mm (XY-Axis - motor-mount-side)
2x 8mm MISUMI Rods 272mm (inner axis for hotend-carriage)
some linear-bearings (8x 12mm), some axle bearings (8x 608) and 6x
https://de.aliexpress.com/item/8mm-bearing-8mmx12mmx30mm-linear-graphite-copper-set-bearing-copper-bushing-oil-self-lubricating-bearing-JDB-8x12x30/32706772476.html?spm=a2g0s.9042311.0.0.27424c4dRsKvP1
ELECTRONIS
Take whatever you want - i choose an MKS sBase 1.3 (smoothieware)
5x 1.8 or 0.9 degree NEMA
...
| clamp-PSU.stl | 266.2KB | |
| config.txt | 24.2KB | |
| Hotend-mount-1of4.stl | 513.9KB | |
| Hotend-mount-2of4.stl | 506.3KB | |
| Hotend-mount-3of4.stl | 656.8KB | |
| Hotend-mount-4of4.stl | 1.1MB | |
| slider-XY-shaft-1of2.stl | 382.8KB | |
| slider-XY-shaft-2of2.stl | 812.5KB | |
| TFT-holder.stl | 325.5KB | |
| X-corner-bracket-1.stl | 147.5KB | |
| X-corner-bracket-2.stl | 147.5KB | |
| X-corner-bracket-3.stl | 147.5KB | |
| X-corner-brackt-moto-mount.stl | 562.8KB | |
| X-holder-optical-endstop.stl | 370.2KB | |
| Y-corner-bracket-4-motor-mount.stl | 630.3KB | |
| Y-corner-bracket_3.stl | 156.1KB | |
| Y-corner_bracket_2.stl | 156.1KB | |
| Y-holder-optical-endstop.stl | 361.4KB | |
| Y_corner_bracket_1.stl | 156.1KB | |
| Z-axis-holder_2x.stl | 1.5MB | |
| Z-holder-optical-endstop-1of2.stl | 370.9KB | |
| Z-holder-optical-endstop-2of2.stl | 315.7KB | |
| Z-motor-mount.stl | 751.8KB | |
| Z-shaft-mount-4x.stl | 805.0KB |
