BL Touch (and clones) support for Flying Bear Ghost 5 stock print head.
You can mount it and keep the full print area. It hides behind the motor and besides the fan.
This is the 9th revision, there is a very little space to accomodate it, and because of this, the support is thin and a little fragile, so handle it carefully.
It's is compatible also with some direct drive mod.
You need:
1 x M3 16mm countersunk screw
2 x M3 8mm countersunk screw
Please comment if you find some problems so I can fix it.
Offset X,Y { -22.6, -59.4}
| BL_Touch_Holder.stl |
