BITx 40 SSB Build 3D Printer Model
The file 'BITx 40 SSB Build 3D Printer Model' is (stl,xlsx) file type, size is 4.0MB.
The file 'BITx 40 SSB Build 3D Printer Model' is (stl,xlsx) file type, size is 4.0MB.
**THIS IS A WORK IN PROGRESS**
Whens the last time you build a SSB rig? Well this was my first and not my last rig i will build. The bill of materials (BOM) is uploaded as a excel file. It contains all the parts i used, prices if i bought them. Along with the 3D printed parts file names. Included is some good photos of how it was put together, I don't feel like taking it apart. But some build tips i have is read the HfSigs wire up its how to wire it up. And keep the leads short.
Bitx 40 SSB Radio with Digital VFO (http://www.hfsigs.com/)
VFO Knob: A 3d Printable knob see files, meant for a 1/8" set screw (see files) Updated 2/19/2017
Volume Knob: Really simple, use a 1/8" set screw to hold it on.
Screen Spacer: With a hole in the case the screen doesn't fit flat so i created a spacer, one thing wrong with it is that the small section i cut out to make fit correctly.
Mic and PTT: This is a two piece mic built with the parts included in the Bitx 40 kit. The only thing that is not included was an Old CB Mic Cable. The cable i have came off of an old raider 4020 CB. Did do a little work on the button on the mic, use a 1/8" pin 0.5" long and a cut down pin spring.
I will post more photos when i have time (3/5/2017)
| Bitx_Board_Spacer_02.prt.stl | 203.7KB | |
| BOM.xlsx | 10.7KB | |
| Raduino_Screen_Spacer_01.stl | 25.5KB | |
| Screen_Spacer.stl | 1.6MB | |
| Small_Mic_Side_1.stl | 784.7KB | |
| VFO_Knob_JAM_03.stl | 7.1MB | |
| Volume_Knob.stl | 1.6MB |
