Bitfenix 3.5″ HDD Bracket/Caddy 3D Printer Model
The file 'Bitfenix 3.5″ HDD Bracket/Caddy 3D Printer Model' is (stl) file type, size is 21.2KB.
The file 'Bitfenix 3.5″ HDD Bracket/Caddy 3D Printer Model' is (stl) file type, size is 21.2KB.
HDD mount for a Bitfenix Prodigy case.
Tested on my case from 2013, no promises about later models.
I tried using this Cooler Master caddy, but the locking tabs were a bit too far forward, and the squeeze arms interfered with the HDD. I pushed the tabs back a bit and gave more flex to the squeeze arms, and now it holds nicely, but can still be released.
HDD has to be screwed from below. Tested using a WD Red drive, with SATA and power connectors on the same side as the arms (towards you when sliding this in).
In-use photos coming eventually.
| Bitfenix_HDD_bracket.stl | 92.9KB |
