Bit Holders For Milwaukee Slim Packout 3D Printer Model
The file 'Bit Holders For Milwaukee Slim Packout 3D Printer Model' is (scad,stl) file type, size is 339.7KB.
The file 'Bit Holders For Milwaukee Slim Packout 3D Printer Model' is (scad,stl) file type, size is 339.7KB.
I created these bit holders to work with my Slim Packout Bins for Milwaukee bit holders, but they also work in the original Milwaukee bit cases.
I have provided STL for both the long and short bit holders. You are also able to modify the holder in Customizer to tweak the fit of the bit, number of slots and size of the holder.
I would consider these holders and the bins I linked to above as a replacement for this thing: Bit Index for Milwaukee Packout Low Profile Organizers. It's a much better design, the bits are held more firmly, and I won't be supporting the old design.
Updated 20121202: Major update for Version 2. The holders are now designed to be printed on the back side with no support as long as your printer is tuned well enough to bridge a 7mm gap. Look at the second and third photos. The upper holder in each photo is the newer holder.
The long bit holders also now grab the bit in the divot, putting less stress on the spring. I've also tweaked the spring to make it easier to remove the bits from the holders.
Finally if you use customizer, you can print labels right on the large bit holders.See photo 4.
| Milwaukee_case_bit_holders_V4.scad | 9.3KB | |
| V2_Milwaukee_case_long_bit_holders.stl | 1.6MB | |
| V2_Milwaukee_case_short_bit_holders.stl | 1.6MB |
