I made this birdhouse to accommodate wrens or chickadees (other similar sized species as well). It has adequate venting and weather-sealed, easily removable wall for cleanout. There are two variations, depending on your printer size and mounting application. I made it to mount to a fence.
It is worth noting that the two version have slightly different entrance diameters.
TOP and BOTTOM Mount: Opening 35mm
DOUBLE TOP Mount: Opening 32mm
Mirror it in your slicer to face the other direction.
Print with PETG or ABS, then paint to help with UV stability. Make sure you use a very wide brim and anything that will help with adhesion to reduce warping.
I used Overture PETG with great results:
https://amzn.to/2Rwhky7
https://amzn.to/3b8o3q4
Look at Print Settings for the recommending setting that I used.
If you found this useful, please consider a SMALL DONATION @
https://www.paypal.me/shanekartz to help cover the time of design.
Please Post your Makes. I would love to see how they turn out.
Thanks, Enjoy!
| birdhouse1_base.stl | 417.4KB | |
| birdhouse1_wall.stl | 124.5KB | |
| birdhouse2_base.stl | 423.8KB |
