Simple birdfeeder for printing with 3d printer volume 150 x 150 x 150 mm and bigger.
I added a roof because the rain accumulated in the bottom of the feeder.
| Futterhaus_Dach.stl | 684.0B | |
| Futterhaus_Deckel.stl | 44.4KB | |
| Futterhaus_Grundplatte.stl | 47.0KB | |
| Futterhaus_Halter.stl | 1.6MB | |
| Futterhaus_Kegeldeckel.stl | 941.4KB | |
| Futterhaus_Stütze.stl | 39.7KB | |
| Futterhaus_Trichter.stl | 375.4KB |
