Bird (Shroom) House 3D Printer Model
The file 'Bird (Shroom) House 3D Printer Model' is (stl) file type, size is 30.9MB.
The file 'Bird (Shroom) House 3D Printer Model' is (stl) file type, size is 30.9MB.
The Bird (Shroom) House is a necessary garden addition for every bird AND garden gnome/fairy lovers.
The design is base on a tree stump ans the ceiling reminds a cep-top hat.
With a bowl on the side for plant/bird food/water.
The small opening on the front is for for our birds friends, ans the big one on the back has been design to add on the window part, a thin transparent plastic window (that's why there is a rib on the inside rong of the window, to insert the plastic circle). Just add a little curtain (incoming) so you will be able to observe if any nest is hosted without disturbing ma' or pa' bird.
The cep-hat lets the air flowing to avoid any rish of moisture or temperature increasing.
The shroom hat is designed to cover the manger is case of rain.
I made an no floor and splited body so you will be able to articulate the house if you want. Same for the top hat.
Printing suggestions:
Body: Wood PLA
Manger: Marble effect PLA (more glossy, wich means better for water containing)
Ceiling support: Cream or White PLA
Window: Brass or Red PLA
Top Cep Hat: Matte Red PLA
| Bati_sans_fond_A.stl | 11.8MB | |
| Bati_sans_fond_B.stl | 9.9MB | |
| Fenetre_arriere.stl | 2.6MB | |
| Mangeoire.stl | 152.2MB | |
| Sol_bati.stl | 266.2KB | |
| support_de_toit.stl | 2.3MB | |
| support_trou_oiseau.stl | 14.3MB | |
| toit_chapeau.stl | 23.3MB | |
| toit_chapeauA.stl | 11.8MB | |
| toit_chapeau_B.stl | 7.6MB | |
| toit_chapeau_C.stl | 7.1MB |
