Bird In Cage ( Quilling Style ) 3D Printer Model
The file 'Bird In Cage ( Quilling Style ) 3D Printer Model' is (stl) file type, size is 6.8MB.
The file 'Bird In Cage ( Quilling Style ) 3D Printer Model' is (stl) file type, size is 6.8MB.
Designed to look like Paper Quilling ,Very fragile and fiddley parts .Quite a lot of cleaning up of support material .I used masking tape to hold parts together then used super glue once parts were lined up.I used a LED Tea light 37mm dia x 45mm high in base,but have supplied a file called Q Bird Stand Base if one is not available ,also file called Q Bird Cage Plug can be used if you only want to use Cage without Bird.Ball shape on top has hole through it so you can hang cage by string etc.2 small catches on hinge section hold top from opening when hung. 142mm High x 90mm Dia
| Q_Bird_Beak.stl | 151.2KB | |
| Q_Bird_Body.stl | 2.3MB | |
| Q_Bird_Cage_Bot_Centre.stl | 1.3MB | |
| Q_Bird_Cage_Bot_Sect.stl | 13.3MB | |
| Q_Bird_Cage_Foot.stl | 1.6MB | |
| Q_Bird_Cage_Hinge_Bot.stl | 8.7MB | |
| Q_Bird_Cage_Hinge_Locks.stl | 6.1MB | |
| Q_Bird_Cage_Hinge_Top.stl | 8.0MB | |
| Q_Bird_Cage_Plug.stl | 385.6KB | |
| Q_Bird_Cage_Top.stl | 4.5MB | |
| Q_Bird_Cage_Top_Fill.stl | 2.4MB | |
| Q_Bird_Cage_Top_Sect.stl | 5.2MB | |
| Q_Bird_Eyes.stl | 126.9KB | |
| Q_Bird_Feet.stl | 218.7KB | |
| Q_Bird_Stand_Base.stl | 2.5MB | |
| Q_Bird_Stand_Side.stl | 2.6MB | |
| Q_Bird_Stand_Top.stl | 4.0MB | |
| Q_Bird_Wings.stl | 1.9MB |
