Bird house dome for inside or outside cages. Pet bird house for our birds at night or just as a play house. Made for our parrotlet birds to fit a pair and has enough space inside for both. The print file is larger and can be scaled down accordingly to bird size and printer bed scale. I printed to 72% uniform scale as shown in pictures. We used small zap-straps to fasten hooks to hang them off the inside top of cage. We placed a folded piece of paper towel inside for comfort.
When I printed the file on Ender 3 S1 Plus I stuck with these basic settings:
Around 22 hours at 72% scale with .2 layer height, print speed 70mms.
"FUZZY SKIN" setting from experimental preset menu at (.3) - 3 wall count - 2 skin layers - 4 bottom layers - 4 top layers - 215 nozzle temp - 60 bed temp - .4 nozzle - 15% skin overlap - 2 top skin layers - 25% infill - zig zag infill - zig zag top and bottom layers - 30% infill overlap to walls - PLA Plus - NO SUPPORTS NEEDED!!!
| BirdDome1.stl | 55.0KB |
