Bird House Christmas Tree Topper And Tealight Holder 3D Printer Model
The file 'Bird House Christmas Tree Topper And Tealight Holder 3D Printer Model' is (STL) file type, size is 949.4KB.
The file 'Bird House Christmas Tree Topper And Tealight Holder 3D Printer Model' is (STL) file type, size is 949.4KB.
This is a birdhouse Christmas tree topper comprising of 7 necessary parts and 3 optional parts.
The optional parts convert the model into a tealight holder for everyday use so it can be unmounted from the Christmas tree and enjoyed throughout the winter if desired, there is also an adapter to mount a LED tealight while the model is on the tree.
You may notice it is lit white in my images, this is because I opted to create a little module inside with a micro SMD led and CR2032 battery to power it as I wanted a cooler light.
When constructing bolt goes through the housing and nut and washer are used to fix the spring to it. You can tighten this by hand but I have included a tool to assist with this as it can be tricky to get off later.
Any questions feel free to drop them in the comments, have a great Christmas all.
| BirdHouse_Bolt.STL | 124.0KB | |
| BirdHouse_House.STL | 21.4KB | |
| BirdHouse_Key.STL | 12.9KB | |
| BirdHouse_Nut.STL | 39.1KB | |
| BirdHouse_Robin.STL | 1.4MB | |
| BirdHouse_Roof.STL | 5.9KB | |
| BirdHouse_Spring.STL | 425.3KB | |
| BirdHouse_TeaLightAdp_01.STL | 13.9KB | |
| BirdHouse_TeaLightAdp_02.STL | 18.6KB | |
| BirdHouse_Washer.STL | 9.5KB |
