Bird Feeder 3D Printer Model
The file 'Bird Feeder 3D Printer Model' is (stl) file type, size is 985.48 KB.
The file 'Bird Feeder 3D Printer Model' is (stl) file type, size is 985.48 KB.
a bird feeder
there are two parts, you don`t need any support.
there is a simple closing system to put the two parts together.
after my first print I enlarged the attached loop, so it is more massive than you can see it on the photos.
with PLA it should be no problem
with PETG(I use Prusament PETG clear): If the columns start to branch out I slow down the speed to 50%; shortly before the bridging starts I slow down the print speed to 30%.
After I saw the bridging was done I rise the speed back to 100%
04.16.20 update:
-- I add a base file with " ....no columns"
-- I add another base file "... no bridge"
If you have problems with the original file, this two different base files should be easier to print.
06.26.20 update for the base no_column file:
I improved some details, so it should be easy to print with all materials.
08:25:20 update for the original basefile(birdhouse_base_1.1_fin.stl):
I improved some details.
have fun and feed the birds
| birdhouse_06_20_base_no_column.stl |
| birdhouse_13_12_19__top60.final.stl |
| birdhouse_base_1.1_fin.stl |
| birdhouse_base_no_bridge.stl |
