Created this wall mount inspired by Yorb's Tinkercad model,
and incorporated some of the ideas from the comments from both listed sources.
(2mm thicker overall, longer support ribs, ...)
Lucked out with the curve on the outer two arches as they were adde without really measuring how much clearance i'd have ( and it worked out nicely if i may say so myself :-)
As i found some water in the vertical feeder foot (which i initially used on a post), i decided to add a slighly rounded water evacuation port + hole to the feeder mounting port.
the feeder mounting port is slightly oversized for easy (dis)mounting, and I used a rubber band to make it sit really solidly, even in recent storm it did not move or turn a millimeter.
Printed on my MK3s+ with 0.3 nozzle.
Feels and hangs out there very solid .. so far so good (try for yoruself at own risk :-)
- be kind , this is my first upload :-) -| Bird_Buddy_Wall_Mount_rounded.3mf | 103.5KB | |
| Bird_Buddy_Wall_Mount_rounded.stl | 243.9KB |
