Wall mount for the Bird Buddy smart bird feeder. Designed to match the dimensions of the official mount sold by Bird Buddy, but a little thicker and with a triangular brace in the middle to keep it from sagging.
I made some adjustments after I printed mine to widen the hole, so these files have not been tested. Let me know if doesn't work.
This probably isn't the strongest design, but I liked the way the official one looked and wanted to see if it would hold up in PETG with minimal extra material and bracing (it does). I do not recommend PLA, but it might work as long as it isn't in direct sun.
You can print EITHER the 2 separate parts (mounting plate and mounting ring) OR the single combined part. If you choose the separate parts as I did, use an M5 bolt and nut to connect them.
You will also need 2 screws to mount to the wall, of course.
Have an idea for improving this? So do I! Scroll down for the source link and have at it. Here's some ideas:
| Bird_Buddy_Wall_Mount_v1_combined.stl | 127.4KB | |
| Bird_Buddy_Wall_Mount_v1_mounting_plate.stl | 69.1KB | |
| Bird_Buddy_Wall_Mount_v1_mounting_ring.stl | 61.0KB |
