this is a work in progress and I have not tested it, feel free to ask me anything :)
I will make the full part list as soon as I get everything in the mail!
you need a longer nozzle, like the mk8 creality nozzle
an upgrade for the stock Biqu B1 print head
LINEAR RAILS REQUIRED AS THE STOCK CARRIAGE BOLTS ARE PROTRUDING AND WILL INTERFERE WITH THE MOUNT
The extruder is the HGX-LITE.
There is a mount for an eddy sensor.
The design uses 5 40mm by 20mm fans.
You need some longer screws, and an endstop (you can desolder the one on the biqu stock head board
this design cant be used with the stock type c cable, you can bypass it quite easily
it uses the metal plate from the original print head for rigidity
| 40x20mm_Dual_Fana_Cover.stl | 108.2KB | |
| 40x20mm_Single_Fan_Cover.stl | 4.8MB | |
| Biqu_B1_Base.stl | 668.5KB |
