Had a 3D-Touch probe that i used for a while, then it broke. Got a Biqu Microprobe 2.0 and had to re-make the mount for it.
Uses m2.5 screws, they'll cut their own threads into the holes, which should fit just right in the holes in the microprobe 2.0
Note: This version is for the Satsana Remix for Ender 3V2 and Ender 3 with BLTouch by Scrath_ linked below. Uses the offset X-43.65 Y-10, or thereabouts. I haven't actually measured it..
At another user's request, added a version with and without heat-set inserts that fits with the Satsana Mini duct.
10/12/24 - Added a version that uses M2.5 heat-set inserts. m2.5x8 screws (i used a laptop screw set) work great, and it doesn't strain the holes in the microprobe, potentially cracking them.
10/27/24 - Added a version for the Satsana Mini, which doesn't have the bit going over the wheel bolt like the one I took the original bracket from. Uses the heat-set inserts.
10/28/24 - added a version of the Mini bracket without the heat-set inserts. use M2.5 screws and they should cut their own threads. Also reduced the height of both Mini versions by 1.25mm thanks to some feedback from Agolyan
| mini_satsana_microprobe_2.0_no_inserts.stl | 69.6KB | |
| mini_satsana_microprobe_2.0_with_inserts.stl | 69.6KB | |
| satsana_microprobe_2.0_bracket_no_inserts.stl | 103.4KB | |
| satsana_microprobe_2.0_bracket_with_inserts.stl | 97.6KB |
![Hand Filament Guide – [Ender 3 Spool Holder] 3D Printer Model](https://cdn.3axis.co/assets/16/58/90/af/165890af-7d67-492e-8766-494fd939150a/images/2ca922a9-3f31-4754-a39e-44eac805f1f5_thumb.jpg)