Note: This mount is for the Biqu H2 v1 with the Phaetus heater block
I was inspired by this mount (https://www.thingiverse.com/thing:4897289) and I figured I would design one for my Biqu H2, since I don't have the heater block the thing was designed for, and I didn't find a similar styled mount for the Biqu H2 heater block.
To install, remove the silicone sock from the heater block, and slide the mount on from the heater cartridge side. I have mine set up so the heater cartridge is on the front side of the toolhead, mainly for better clearance because I have the part cooling fan mounted on the back of the toolhead.
To remove, hold either side of the mount, and push on the heater block through the opening on the mount.
Be careful not to put too much pressure on the heater block, or you risk damaging the heatbreak.
I've included the STEP file exported from Fusion 360 for anyone that needs it.
| Biqu_H2_ADXL345_Nozzle_Mount.step | 3.3MB | |
| Phaetus_ADXL345_Nozzle_Mount.stl | 130.1KB |
