Bioshock-Inspired EVE Drinking Chalice 3D Printer Model
The file 'Bioshock-Inspired EVE Drinking Chalice 3D Printer Model' is (stl) file type, size is 60.1KB.
The file 'Bioshock-Inspired EVE Drinking Chalice 3D Printer Model' is (stl) file type, size is 60.1KB.
Celebrate New Years in Rapture with style using this modified EVE hypo! Instead of pricking a vein, recharge your plasmids by imbibing on a cocktail of EVE and watch as onlookers sneer at you with jealous eyes and sore wrists.
I designed this EVE chalice for DragonCon's Bunny Hutch party and was entirely inspired by the EVE hypo design from the Bioshock Franchise. The glass features a disposable glass, so if you drink something sticky or otherwise lose the glass, you can swap it out and start fresh. The LED effect can be created using any ultrabright blue LED, but I used a self-contained one I found on Amazon. Links to both the glasses and LED below.
For printing, you might want to increase the infill to give strength to the arm that holds the drink in place. It also uses a minimum amount of support material, especially when you set max overhang to 46 degrees. I highly recommend printing this with raft.
LEDs
(https://www.amazon.com/gp/product/B00LZUX07O)
Cups
(https://www.amazon.com/gp/product/B01LVWJTBQ)
If you make this, I want to see! You can tag me @30secfantasy.
Photography on this Thing is copyright Eric Lange 2018.
The 3D data is under a Creative Commons - Attribution license.
| Eve_drink_holder_5.stl | 256.7KB |
