If you have problems with breaking connectors you can find improved models here:
https://www.thingiverse.com/thing:5205509
You can find parts list and quantity here:
https://www.bricklink.com/v2/catalog/catalogitem.page?S=8697-1#T=I
Midak skyblaster was divided into three pieces and should be glued together.
Midak is unable to shoot! It is only for display.
Models are not mine. They were taken from Stud.io 2.0. I just resized them and made printable (stl repairing and adding missing holes etc.).
I had to remove Kanohi Ignika Model due to copyright issue :(
| 2780_Pin_with_Friction_Ridges_Lengthwise.stl | 189.1KB | |
| 32054_Pin_3L_with_Friction_Ridges_Lengthwise_and_Stop_Bush.stl | 480.4KB | |
| 32062_Axle_2L.stl | 15.7KB | |
| 32138_Pin_Double_with_Axle_Hole.stl | 1.0MB | |
| 32184_Axle_and_Pin_Connector_Perpendicular.stl | 343.9KB | |
| 32249_Liftarm_Modified_L-Shape_Quarter_Ellipse_Thin_3_x_3.stl | 265.7KB | |
| 32348_Liftarm_Modified_Bent_Thick_1_x_7.stl | 410.0KB | |
| 32523_Liftarm_Thick_1_x_3.stl | 136.8KB | |
| 32534_Panel_Fairing__7_Small_Long_Large_Hole_Side_A.stl | 86.1KB | |
| 32535_Panel_Fairing__8_Small_Long_Large_Hole_Side_B.stl | 86.1KB | |
| 32557__Pin_Connector_Perpendicular_Double_3L.stl | 195.7KB | |
| 3705_Axle_4L.stl | 15.7KB | |
| 3713_Technic_Bush.stl | 205.9KB | |
| 41239_Liftarm_Thick_1_x_13.stl | 592.1KB | |
| 42003__Axle_and_Pin_Connector_Perpendicular_3L_with_2_Pin_Holes.stl | 333.5KB | |
| 43093_Axle_1L_with_Pin_with_Friction_Ridges_Lengthwise.stl | 203.4KB | |
| 44350__Panel_Fairing_20_Large_Long_Small_Hole_Side_A.stl | 880.4KB | |
| 44351_Panel_Fairing_21_Large_Long_Small_Hole_Side_B.stl | 880.4KB | |
| 4519_Axle_3L.stl | 15.7KB | |
| 45749_Rahkshi_Leg_Lower_Section.stl | 292.0KB | |
| 47298_Foot_Toa_Metru_.stl | 254.3KB | |
| 47306_Lower_Torso_with_2_Ball_Joint_and_7_Tooth_Half_Gear.stl | 1001.2KB | |
| 47312_Head.stl | 1006.9KB | |
| 48989_Pin_Connector_Perpendicular_3L_with_4_Pins.stl | 780.0KB | |
| 53543__Toa_Inika_Thigh_Cover.stl | 730.0KB | |
| 53544__Toa_Inika_Upper_Arm_Cover.stl | 1.2MB | |
| 53564_Piraka_Torso_with_2_Ball_Joint.stl | 1.8MB | |
| 54272_Lava_Chamber_Gate_Sword.stl | 893.0KB | |
| 54821_Zamor_Sphere.stl | 250.1KB | |
| 57526_Thigh_and_Shoulder_Armor_Right.stl | 243.3KB | |
| 57527__Aqua_Warblade.stl | 847.8KB | |
| 57528__Claw_Blade_Small.stl | 190.1KB | |
| 57536_Head_Connector_Block_EyeBrain_Stalk_Short.stl | 79.3KB | |
| 57541_Thigh_and_Shoulder_Armor_Left.stl | 243.3KB | |
| 57544_Shoulder_Armor.stl | 618.8KB | |
| 57563_Mahri_Matoran_Blade.stl | 466.1KB | |
| 57572__Power_Sword.stl | 607.2KB | |
| 57587_Round_7_x_7_x_4_Dome_Top.stl | 1013.6KB | |
| 58177_Axle_and_Pin_Connector_3_x_3_with_Axle_2_Pin_Holes_and_Axle_Hole.stl | 270.8KB | |
| 60176_Axle_Connector_2_x_3_with_Ball_Joint_Socket_Closed_Sides.stl | 1.6MB | |
| 60483_Liftarm_Thick_1_x_2.stl | 96.7KB | |
| 60932cx1_Midak_part1.stl | 2.3MB | |
| 60932cx1_Midak_part2.stl | 886.0KB | |
| 60932cx1_Midak_part3.stl | 332.4KB | |
| 60935__Wing_Large.stl | 131.7KB | |
| 61053_Axle_and_Pin_Connector_2_x_5_with_2_Ball_Joint_Sockets_Closed_Sides.stl | 1.2MB | |
| 61054_Axle_and_Pin_Connector_2_x_7_with_2_Ball_Joint_Sockets_Closed_sides.stl | 956.4KB | |
| 6535c__Axle_Connector_2L.stl | 132.8KB | |
| 6558_Pin_3L_with_Friction_Ridges_Lengthwise.stl | 521.7KB | |
| 6587_Axle_3L_with_Stud.stl | 105.4KB | |
| Toa_Ignika_without_mask.rar | 7.6MB |
![Naho's Kaukau / Huna [ver.iylv] 3D Printer Model](https://cdn.3axis.co/assets/06/52/1d/79/06521d79-3b16-4976-ae62-405ef9104976/images/597c2066-d642-4fa9-b998-77113dc61a0c_thumb.jpg)
