Bike Mount For PG03 GPS (£25 Bicycle Sat Nav) 3D Printer Model
The file 'Bike Mount For PG03 GPS (£25 Bicycle Sat Nav) 3D Printer Model' is (stl) file type, size is 521.8KB.
The file 'Bike Mount For PG03 GPS (£25 Bicycle Sat Nav) 3D Printer Model' is (stl) file type, size is 521.8KB.
The PG03 GPS (£25 pocket sat-nav) makes an ideal cycle computer, as it also has speedo, odo, altimeter, and clock, besides the sat-nav function. There doesn't appear to be a bike mount available for it though so I made this one.
When accurately printed it will hold the PG03 securely, over very rough terrain. If your print results are not so perfect, there is an anchoring hole to tether the device, in case it comes loose.
This is a two piece print, select the type of cradle you prefer (handlebar or stem) and then the mount most suited to your bar diameter, assemble with a drop of super glue.
If the fit on the bar is not great you can use a piece of inner tube to pad the gap. Double loop a cable-tie through (see pic) to secure.
Printed on an Ender 2 using Rigid Inks filament, 50% infill at 0.15mm layer
| GPS_31mm_mount.stl | 336.9KB | |
| GPS_36mm_mount.stl | 323.1KB | |
| GPS_41mm_mount.stl | 288.3KB | |
| GPS_H-Bar_cradle.stl | 629.2KB | |
| GPS_stem_cradle.stl | 629.2KB |
