This is a case for the BigTreeTech SKR V1.4 Turbo. It was modeled from a turbo board but, I assume it will work for a non-turbo version.
The holes in the bottom of the case is so you can Tee-nut mount it to your 3D printer.
IT IS HIGHLY RECOMMENDED that you print this with a brim otherwise the corners may cool during printing and curl up.
** Holes are undersized so you can drill them to the size you need.
** Depending on how poorly your printer handles over-hang, the SDCard slot might be a little tight. Just adjust it with a small file, sandpaper, or emory board.
| BTT_SKRV1.4_Box_bottom-v4.stl | 2.0MB | |
| BTT_SKR_V1.4_Box_lid.stl | 436.6KB |
