Biggs Battle Box – Compact – Stone, Wood, Dragonscale 3D Printer Model Free Download

Description Files (22)

Summary

More compact version of my compact dice boxes.

No Magnets required for this one.
The lid slides into the top of the box and is held in place with a friction latch that you have to lift up to release.
The mini dice tower can be used in the slot it is stored in or outside of the box.
The peg compartment tapers up for ease of removal.

Comes in three flavors:

Stone/Brick
Dragon Scale
Wood

I have also included three lid designs for each of the boxes:

Plain
DND Logo with Border
DND Logo with fancy border.

I printed the ones pictured at 0.2mm layer height.

Dimensions:

Overall dimensions are 124mm x 122mm x 37mm
Dice Box - Has compartments for Dice, MiniFigs, Pegs, and a Dice Tray (small) / Dice tower
- Dice Box Dimensions: 124mm x 122mm x 37mm
  Internal dimensions are:
- Dice Compartment - 65mm x 65mm x 35mm
- Dice Tray/Tower Tray - 93mm x 55.5mm x 35mm
- MiniFig Compartment - 65mm x 49mm x 35mm
- Peg Compartment - 50.5mm (Tapers up after 23.5) x 21mm x 35mm
Dice Tower Dimensions: 88mm x 50mm x 30mm
Lid/Tracker Dimensions: 121mm x 118.75mm x 6mm
- Spell Slots - Levels 1 thru 9
- Death Saves
- Hit Points - Counters 1 - 999
- Inspiration - 6 slots for those who use more than one point
- Misc - 10 slots for tracking things like luck, tokens, etc.
Lid/Logo Printing Instructions:
- Print the Logo first (It should look upside down and backwards)
- Center the Logo on the build plate (very important for alignment with lid) - your slicer should have an option to center the object
  - I suggest printing this slowly and do Not used a Brim as you will be leaving it on the build plate, I printed mine at 30mm/s with a Skirt that was removed after printing finished
  - It should only be 1 layer thick if printing at .2mm layer height
    If printing at .2mm layer height you can turn on Ironing to make sure that the layer looks a bit better
- Leave Logo and border design on the build plate and remove any wipe and/or skirt you have printed
- Print the Lid
  - Center the Lid on the build plate (very important for alignment with logo) - your slicer should have an option to center the object
  - Print first layer very slowly for Wood Logos or use glue. I printed mine at 15mm/s. I had issues with the sides pealing up that may have just been attributed to the wood filament that I was using

DnD-Box-v2-Dragon-Box.stl	8.2MB
DnD-Box-v2-Dragon-Lid-Logo-B.stl	4.0MB
DnD-Box-v2-Dragon-Lid-Logo-DND-BF.stl	3.8MB
DnD-Box-v2-Dragon-Lid.stl	4.6MB
DnD-Box-v2-Dragon-Logo-B.stl	1.1MB
DnD-Box-v2-Dragon-Logo-DND-BF.stl	1.4MB
DnD-Box-v2-Dragon-Tower.stl	3.8MB
DnD-Box-v2-Pegs_1.stl	1.4MB
DnD-Box-v2-Stone-Box.stl	2.0MB
DnD-Box-v2-Stone-Lid-Logo-DND-B.stl	2.0MB
DnD-Box-v2-Stone-Lid-Logo-DND-BF.stl	2.2MB
DnD-Box-v2-Stone-Lid.stl	2.1MB
DnD-Box-v2-Stone-Logo-DND-B.stl	1.1MB
DnD-Box-v2-Stone-Logo-DND-BF.stl	1.4MB
DnD-Box-v2-Stone-Tower.stl	1.4MB
DnD-Box-v2-Wood-Box.stl	2.1MB
DnD-Box-v2-Wood-Lid-Logo-DND-B.stl	1.8MB
DnD-Box-v2-Wood-Lid-Logo-DND-BF.stl	2.2MB
DnD-Box-v2-Wood-Lid.stl	1.8MB
DnD-Box-v2-Wood-Logo-DND-B.stl	1.1MB
DnD-Box-v2-Wood-Logo-DND-BF.stl	1.7MB
DnD-Box-v2-Wood-Tower.stl	1.0MB

Biggs Battle Box – Compact – Stone, Wood, Dragonscale 3D Printer Model

Summary

Tags

You might also like