Big Wall Clock (simple) 3D Printer Model
The file 'Big Wall Clock (simple) 3D Printer Model' is (stl) file type, size is 34.1KB.
The file 'Big Wall Clock (simple) 3D Printer Model' is (stl) file type, size is 34.1KB.
I wanted something clean and simple to put on our wall. As shown on the pictures, the clock has a diameter of around 75 cm. It is super easy to print and don't use much material.
I used this cheap quartz movement: https://www.banggood.com/DIY-White-Hands-Silent-Quartz-Wall-Clock-Movement-Repair-Parts-p-958127.html
The "lines" are mounted to the wall with double-sided tape. I used a laser level, an inclinometer, a string and a nail to put them at the right location and angle.
The holes in the hands are a bit smaller than they should be so that you can adjust them with a file to fit perfectly to the movement.
| clock_body.stl | 112.6KB | |
| clock_hours.stl | 30.0KB | |
| clock_line.stl | 684.0B | |
| clock_line_big.stl | 684.0B | |
| clock_minutes.stl | 30.0KB |
