Big Gears For Custom Cog Work 3D Printer Model Free Download

Description Files (20)

Summary

These cogs are meant for decorative custom cog work. They are quite big, so the installation might get really impressive.

The cogs are divided into three, five or seven segments, witch are printed separately and glued together later.

I used ABS, since it could be glued reliable. See my German Video about ABS

The cogs are prepared for 608 ball bearings. (The smaller ones are using 685 bearings). for mounting M5 screws are suitable. I included a set of spacers to relieve the bearings from axial pressure.

Do elevate the cogs there are two bearing blocks. This enables running the cogs on two levels.

Please make sure your installation is safe. Keep in mind curios children's fingers grabbing any thing interesting. Make sure they wouldn't be squished in any way.

More parts are coming soon ...

A short demonstration can be seen at my Facebook Video

See my other Steampunk designs in My Steampunk Stuff

BearingBlock.stl	252.8KB
BearingBlockXL.stl	451.4KB
BottomSpacerM5.stl	27.6KB
BottomSpacerM5Teenut.stl	27.8KB
InnerSpacer25Half.stl	28.8KB
Z12M9Sp3.stl	212.8KB
Z15M9Sp3.stl	111.1KB
Z18M9Sp3.stl	135.3KB
Z20M9Sp5.stl	91.0KB
Z21M9Sp3.stl	156.2KB
Z24M9Sp3.stl	166.4KB
Z25M9Sp5.stl	107.5KB
Z27M9Sp3.stl	182.4KB
Z30M9Sp3.stl	205.7KB
Z30M9Sp5.stl	127.0KB
Z35M9Sp5.stl	124.6KB
Z35M9Sp7.stl	93.9KB
Z40M9Sp5.stl	95.5KB
Z42M9Sp7.stl	69.5KB
Z45M9Sp5.stl	123.3KB

Big Gears For Custom Cog Work 3D Printer Model

Summary

Tags

You might also like