Bicycle Rotor Clock 2 3D Printer Model
The file 'Bicycle Rotor Clock 2 3D Printer Model' is (STL) file type, size is 156.5KB.
The file 'Bicycle Rotor Clock 2 3D Printer Model' is (STL) file type, size is 156.5KB.
This is a base I designed to make a clock out of an old rotor from my bike. It's designed to be used with a 180mm Shimano SLX rotor and this clock motor.
You'll need to get (6) M5 nuts and (6) M5 8mm bolts to attach the rotor to the clock motor mount section. I just used a dremel to cut my brake rotor bolts to the right size. I used some old calipers I had lying around, but theoretically you should be able to use other brands/models. And you can get creative with how you want to mount everything to a baseplate. I had an extra long M6 bolt call all the way through the wooden stand so I could fasten it securely.
| rotor_clock_with_brake_1.STL | 1.2MB | |
| roto_clock_with_brack_mount.STL | 255.6KB |
