I couldn't tell you why I made this, but it works I guess. It is meant to printed from hard plastic, not TPU. The lock-on flexible bit doesn't have much travel, so should you choose to actually print this for whatever reason, you may have to shim with electrical tape or aluminum foil as I did (internal diameter in CAD is 22.5mm). You will need two countersunk M4 screws and nuts for the lock-on mechanism.
IMPORTANT:
• DO NOT use this for mountain biking, you will DIE
• the hard textured bit absolutely destroyed my winter gloves, would probably do the same to bare hands
| Ergo_Grips_Left.STL | 4.4MB | |
| Ergo_Grips_Right.STL | 4.4MB |
