Bicycle Cargo Cage 3D Printer Model
The file 'Bicycle Cargo Cage 3D Printer Model' is (stl) file type, size is 7.5MB.
The file 'Bicycle Cargo Cage 3D Printer Model' is (stl) file type, size is 7.5MB.
Update (2021/02/28): Since there have been reports of breakage at the bottom, I've reinforced this. Also since almost everyone is likely printing this using FDM, I've added a models with most of the cutouts removed to make it easier to print (since the printer will hollow those sections out anyway).
Update (2020/08/29): I just realized (after all these years) the bottle cage standard is 2.5" spacing (63.5mm) not 64mm (although brands also are inconsistent)...I hadn't experienced any issues since I had also designed my own mounts/bosses for these. I've updated the model with the 63.5mm spacing, and ovalizing the holes for variances in manufacturers.
Cargo cage for bicycles supporting the Salsa 3 bolt type mounts. Will also work with normal bottle mounts if there is enough space and keeping in mind a lower load limit.
Best to print this vertically with PETG or ABS. More brittle materials such as PLA may fail under load. Or if your printer has nylon/nylon-CF capabilities that would be ideal. Supports are needed for most printers.
Works with Voile or Titan straps and a large bottle (Nalgene style) or small dry bag (~5L).
| LargeBottleCage_MultiPosition.10-FDM.stl | 9.9MB | |
| LargeBottleCage_MultiPosition.10-FDM2.stl | 7.0MB | |
| LargeBottleCage_MultiPosition.10.stl | 8.9MB |
