I'm no 3D printing expert and this is not official Bibo.
I have been having a few print problems with layers separating in the print.
I've done plenty of online research to try and solve it.
I made this test so I could tweak the printer and compare results quickly marking each print with a Sharpie and some writing some notes.
I've no idea if that is an accepted way of dealing with problems but it has helped me and so I put this up available in case it can be of help to others.
It should be printed with the closed small end on the bed and should print 50mm in height.
Thanks
| Bibo_Layer_Test.stl | 296.8KB |
