Better Chisel/Plane Sharpening Jig 3D Printer Model
The file 'Better Chisel/Plane Sharpening Jig 3D Printer Model' is (stl) file type, size is 790.3KB.
The file 'Better Chisel/Plane Sharpening Jig 3D Printer Model' is (stl) file type, size is 790.3KB.
Also available at Printables: https://www.printables.com/model/520488-better-chisel-sharpening-jig
This is a chisel/plane sharpening jig. It accommodates chisels as small as 0.25 inch and plane blades as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side is facing upward. The flat side of the chisel must be referenced against the upper lip of the vise.
After printing, you will need to cut through the bridging layer of the holes. You also may need to drill through the external holes with a ¼" bit. Mine were a little tight, and you want the mobile jaw to move smoothly.
Sharpening distances from the front face to the chisel tip:
Required hardware:
| Chisel_sharpener_flattened.stl | 2.3MB |
