This is a completely new built case for: https://www.thingiverse.com/thing:1944905
As the original (and my remix also) came out too flimsy I decided to re-build a new case from scratch. It is slightly larger because the recommended battery is hard to obtain here in Germany (or may be Europe). The one that I found is slightly larger with the following measurements: 65mm x 40mm x 6,3mm
This battery is available here: https://eckstein-shop.de/LiPo-Akku-Lithium-Ion-Polymer-Batterie-37V-2000mAh-JST-PH-Connector
I did not check the fit of the slide switch in the latest version. Feel free to contact me for updates if necessary
For this case some hardware is required:
4x screw M2 x 4 mm
4x screw M3 x 25 mm
The case above was printed in fillamentum "vertigo grey"
https://fillamentum.com/products/pla-extrafill-vertigo-grey
Thanks to Adafruit for this great project!
| Weather_Station_Case_JT3D_Body.stl | 231.7KB | |
| Weather_Station_Case_JT3D_Lid.stl | 300.3KB |
