UPDATE 11/12/24: Added reinforcement across the whole lip.
UPDATE 25/10/24: Due to excessive clatter on the 8020 profile, I've added a reinforced lip. Seems to reduce the noise, hopefully it holds up to the constant vibrations.
As this mount acts as a lever for the bass shaker, there is a significant increase in the forces that are felt. Other mounts restrict the movement of the shaker as it is bolted down to the profile on both sides; essentially the opposite of what the shaker needs. Can attach the shaker to the mount with M4 bolts and nuts or use M3 hot melt inset nuts.
Designed for my Dayton Audio BST-1 but should fit other bass shakers with a 100x100 mounting pattern.
Printed with 6 walls, 25% infill.
| bst1-mount-v3.stl | 220.4KB |
