I recently got a Betta SE automatic pool skimming robot for the pool. It's a great device! It just swims around the pool by itself, running on solar power and its 30 hour battery, keeping the top of the pool skimmed clean!

It also comes with a remote, that you rarely use. So I made a little wall mount to put it next to some other pool accessories.

This takes less than an hour to print. I've included two small screw holes to mount it to the wall. I've also included both STL and STEP files, along with the original Fusion file, in case you want to remix it.

You'll notice that the photo I took of mine has the name (Picard) printed underneath the words BETTA REMOTE (I name all of my robots), as well as the text colored in. The letters were simply painted in Bambu Studio. The initial print profile does not include painted letters, so it can be used without an AMS. If you'd like to add a name to yours, you can either add text in the slicer, or open the Fusion file and edit the text directly.

Here's a link to the Betta SE unit that I have, in case you are interested:

https://www.amazon.com/gp/product/B0BW38MP5C/

The wall mount was made specifically to fit the remote that came with the Betta SE, but any Betta unit likely uses the same basic remote housing, so this wall mount should still work for you.