Hello! This thing is a set of inlay boxes for the tabletop game "Betrayal at House on the Hill". I can highly recommend the game for anyone who dreams of being possessed by evil spirits hellbent on murdering the other players characters.
This thing is a set of boxes that are meant to fit perfectly into the cardboard box in place of the default plastic inlay.
For the cards, I used the Betrayal card Holder by [Wizbiz02]. If you are using sleeved cards, I recommend using this variant of card holder instead, and scaling the width up to 204mm for a perfect and snug fit in the box (but you might need a bigger printer than I have for that).
Have fun!
Edit: I don't know if this works for the expansion as well, as I don't have it. Anyone is free to make a remix if the feel like it!
| BaHotH_Inlay_-_2x2_storage_-_bottom.stl | 5.7KB | |
| BaHotH_Inlay_-_2x2_storage_-_lid.stl | 7.3KB | |
| BaHotH_Inlay_-_2x2_storage_-_top.stl | 13.0KB | |
| BaHotH_Inlay_-_char_card_and_2x2x2_storage_-_bottom.stl | 114.6KB | |
| BaHotH_Inlay_-_char_card_and_2x2x2_storage_-_lid.stl | 14.5KB | |
| BaHotH_Inlay_-_char_card_and_2x2x2_storage_-_middle.stl | 17.5KB | |
| BaHotH_Inlay_-_char_card_and_2x2x2_storage_-_top.stl | 24.5KB | |
| BaHotH_Inlay_-_dice_and_model_box_-_bottom.stl | 83.4KB | |
| BaHotH_Inlay_-_dice_and_model_box_-_lid.stl | 8.4KB | |
| BaHotH_Inlay_-_dice_and_model_box_-_middle.stl | 89.1KB | |
| BaHotH_Inlay_-_entry_hall_and_tracker_slots_-_bottom.stl | 4.2KB | |
| BaHotH_Inlay_-_entry_hall_and_tracker_slots_-_top.stl | 4.2KB | |
| BaHotH_Inlay_-_filler.stl | 3.2KB | |
| BaHotH_Inlay_-_tile_holder_-_bottom.stl | 29.2KB | |
| BaHotH_Inlay_-_tile_holder_-_top.stl | 30.8KB |
