Is your Beta65x or Beta75x going a little too fast indoors or not fast enough outside then this will let you adjust the camera angle to slow you down or speed you up.
It fits the stock Z02 camera and VTX.
The stock canopy fits but you will have to modify it elongating the lens hole to allow for the angle change or print the canopy designed for this.
https://www.thingiverse.com/thing:3137474
You will need 2 M2 screws at least 4mm but you can get away with longer and possibly down to 3mm, I used 5mm as I have lots of those.
Print at 0.1mm layer height for the nicest/strongest mount.
I do not own a Beta6/75x, I made these for the community, please consider tipping to help me to continue making things for the community.
Shout out to Nick Burns for his help in testing these designs to make sure they fit/work, please subscribe to his youtube channel, it is full of great information and he is the fastest indoor pilot I have seen on youtube.
https://www.youtube.com/channel/UCBGpbEe0G9EchyGYCRRd4hg
| Z02_Adjustable_Camera_Mount.stl | 49.3KB | |
| Z02_Adjustable_Camera_Mount_Base_v9.stl | 181.1KB |
