This my own take on travel case for BetaFPV Pavo20
I tried make the case compact and make all the spaces useful:
There are 3 versions of different height:
Standard Version:
this version features a big battery storage space (6 pcs) under the quad, and 4 pcs on the mid section.(assume the batteries are 450mah)
Parts to Print:
Pavo20BaseStd
Pav20Mid
Pavo20CaseCapV2
Clips
Slim Version
Some how I feel the standard version is too big, so I modified it to this slim version, removed all the under quad battery space. Only 4 batteries can be stored.
Parts to Print:
Pavo20BaseSlim
Pav20Mid
Pavo20CaseCapV2
Clips
FlippedSlimVersion(recommed)
After using both previous version, I feels the 2 later design is kind of annoying when I just want to open one layer. And the center of mass is pretty high casing the case to tip over when opened. So made a new version to have all the batteries on the bottom , and flipped the quad upside-down to save space.
Parts to Print:
Pavo20BaseSlim V2
Pavo20CaseCapV2
Clips
Personally I recommed: FlippedSlimVersion
OtherParts:
All the hinges and clips using M3 screws and nuts:
M3x30 screw : 8
M3 lock nuts : 8
| Clips.step | 168.8KB | |
| Clips.stl | 273.2KB | |
| Pav20Mid.step | 917.3KB | |
| Pav20Mid.stl | 6.6MB | |
| Pavo20BaseSlim.stl | 812.0KB | |
| Pavo20BaseSlim_V2.step | 1.0MB | |
| Pavo20BaseSlim_V2.stl | 10.6MB | |
| Pavo20BaseStd.step | 864.3KB | |
| Pavo20BaseStd.stl | 1.1MB | |
| Pavo20CaseCap.step | 1.5MB | |
| Pavo20CaseCapV2.step | 2.4MB | |
| Pavo20CaseCapV2.stl | 9.8MB |
