Bernzomatic Mini Torch Handle ST500 And ST1000 3D Printer Model
The file 'Bernzomatic Mini Torch Handle ST500 And ST1000 3D Printer Model' is (stl) file type, size is 14.7MB.
The file 'Bernzomatic Mini Torch Handle ST500 And ST1000 3D Printer Model' is (stl) file type, size is 14.7MB.
Torch handle to hold a Bernzomatic mini-torch. This handle will fit the ST500, ST500CKC, and ST1000.
To assemble, you will need one 3mm hex nut one 3mm washer and one M3 x 35 socket head cap screw.
I received an ST500 as a gift. It does a fantastic job on heat shrink tubing and is exceptional for smoothing out prints. The heat shrink tip also removes the marks left behind when removing support material. It has a trigger igniter and a continuous flame lock that keeps it lit while in use.
There are two handles available, one plain and one tagged with Engineering Aesthetics. There is also a cap for the base so you can store the accessories in the handle.
Here are a few links to the torch, mine came from Home Depot.
https://www.homedepot.com/p/Bernzomatic-ST500T-Auto-Ignite-Butane-Torch-335258/205495608
https://www.bernzomatic.com/Products/Hand-Torches/Instant-On-Off/ST500
https://www.amazon.com/Bernzomatic-Micro-Torch-Solderng-Kit/dp/B0785S5985/ref=sr_1_9?s=hi&ie=UTF8&qid=1520472378&sr=1-9&keywords=micro+torch+bernzomatic
| Bernz_Assembled.stl | 7.3MB | |
| Bottom_Cap.stl | 297.7KB | |
| Mounting_Clip.stl | 848.8KB | |
| Torch_Handle.stl | 5.2MB | |
| Torch_Handle_EA.stl | 20.2MB |
