This is an enclosure for a bench power supply that I made. It was made for one of those Buck / Boost converters from eBay or similar. I used a Hirschmann RPS 80 24 volt switch mode power supply to run it that I happened to have in my junk box. I used a pair of speaker 4mm terminal posts for the output and an IEC C14 chassis connector for the mains in.
| Box_v11.f3d | 214.1KB | |
| Box_v11_base.stl | 734.7KB | |
| Box_v11_Top.stl | 26.4KB |
