I am building a oversized Lulzbot TAZ printer and was having a hard time getting the belts tight with the stock set up so I came up with this. It works by twisting the leaver and causing the belt to wrap around taking up the slack. Then just tighten the M5 screw and done.
Edit: 4/13/2016
Added the mounting bracket for the Y carriage. This uses the same parts as the X carriage as well except for the one part.
x_belt_tension-3.stl & x_belt_tension-2.stl
| x_belt_tension-1.stl | 276.7KB | |
| x_belt_tension-1.stp | 211.7KB | |
| x_belt_tension-2.stl | 318.3KB | |
| x_belt_tension-2.stp | 321.9KB | |
| x_belt_tension-3.stl | 182.6KB | |
| x_belt_tension-3.stp | 364.4KB | |
| x_carrage_plate.stl | 208.9KB | |
| x_carrage_plate.stp | 277.4KB | |
| y_belt_tension-1.stl | 302.6KB | |
| Y_BELT_TENSION-1.stp | 306.2KB |
