Belt Driven Dual Z Axis Tevo Tarantula 3D Printer Model
The file 'Belt Driven Dual Z Axis Tevo Tarantula 3D Printer Model' is (stl) file type, size is 414.3KB.
The file 'Belt Driven Dual Z Axis Tevo Tarantula 3D Printer Model' is (stl) file type, size is 414.3KB.
UPDATE: 3/09/2018
I added frame mounts with integrated beltpulleys, you can mount these if you want the belt upgrade + frame mount. it is easier to print, you have more z clearance...and your printer is more accurate because of less frame vibrations!
This is a remix of the Belt driven Z-Axis / Worm Gear Mount" by VecteR.
This thing allows for belt driven z axis on the tevo tarantula.
i`ve made some changes so you can implement belts on both sides of the Z axis to maintain the stability of the z axis (driven by just one stepper motor).
To install correctly i attached some photos, but please check for the detailed installation of some stls the original thingi here : https://www.thingiverse.com/thing:1966483
No need to change firmware or calculate steps/mm because worm gear maintains same ratio as standard z rod....
When powering down the stepper motor, the worm gear prevent the x gantry to fall down.
Many thanks to VecteR!
BOM printable;
1 x https://www.thingiverse.com/thing:181349 (horizontal belt tensioner)
1x Right belt guide.stl
1x motormount.stl
1x Z holder left.stl
1x left belt guide.stl
2x Gantry holder.stl
4x Return_pulley_belt_guide.stl
1x spacer middle left.stl
1x spacer long left 25mm.stl
1x Spacer small.stl
This is the full 3d printable parts list, you don`t need to download anything from the original thingi.
BOM to buy;
-1:20 worm gear
-5mm diameter shaft x 100mm
-8x 625zz bearings
-----OR-----
https://www.conrad.be/p/zilverstalen-as-500-mm-5-mm-237078
| Gantry_holder.stl | 233.7KB | |
| left_frame_mount+pulley.stl | 152.9KB | |
| motormount.stl | 142.7KB | |
| Return_pulley_belt_guide.stl | 111.2KB | |
| right_frame_mount+pulley.stl | 157.3KB | |
| spacer_horizontal_gt2_pulley_line_up.stl | 122.9KB | |
| spacer_long_left_25mm.stl | 160.9KB | |
| spacer_middle_left.stl | 170.5KB | |
| Spacer_small.stl | 122.9KB | |
| Z_holder_left.stl | 112.4KB |
