UPDATE 13 Sept 2022
SPLIT Wings and Rear Fuselage
Allows all bits to fit on 220x220x200 printer
Note: Wing1 should to be diagonal to fit on bed
VERSION 3 - MAY 2021 Update
https://www.youtube.com/watch?v=l0HZ2BEzlS8
https://www.youtube.com/watch?v=YlHsWfz3lmw
FOR DETAIL SEE INCLUDED:
RC Groups Thread
https://www.rcgroups.com/forums/showthread.php?3358801-Bell-P-39-Airacobra
Plane Specifications
Recommended 3D Printer
Materials
Base Recommended Print Setting
Nozzle / Wall Thickness : 0.4mm
Perimeters : 1
Exceptions : (SEE TEXT)
Bottom layers : 2 or 3
Top layers : 3-5
Infill : None
Exceptions : (SEE TEXT)
Generate Support : Off
Exceptions : (SEE TEXT)
Printing Temp : 220 -230degC
At top end of filament recommendation to ensure good layer fusion
Suggested Build Plate : 60degC
Suggest Fan Speed : 0% (improves strength)
| P39-AilHornL.stl | 110.8KB | |
| P39-AilHornR.stl | 110.8KB | |
| P39-AilL.stl | 129.5KB | |
| P39-AilR.stl | 129.5KB | |
| P39-CabinF.stl | 291.3KB | |
| P39-CabinR.stl | 442.6KB | |
| P39-ElevJoiner.stl | 116.6KB | |
| P39-ElevL.stl | 163.5KB | |
| P39-ElevR.stl | 159.9KB | |
| P39-ExhaustL.stl | 695.6KB | |
| P39-ExhaustR.stl | 695.6KB | |
| P39-Instructions.pdf | 4.7MB | |
| P39-LegFront.stl | 481.9KB | |
| P39-LegMainL.stl | 308.9KB | |
| P39-LegMainR.stl | 308.9KB | |
| P39-MidFuse.stl | 704.4KB | |
| P39-Nose.stl | 1.4MB | |
| P39-PowerPod.stl | 226.3KB | |
| P39-PowerPodClip.stl | 127.9KB | |
| P39-RearFuse-Split2.stl | 3.7MB | |
| P39-RearFuse.stl | 2.4MB | |
| P39-Rudder.stl | 1009.0KB | |
| P39-ServoPlate1.stl | 4.9KB | |
| P39-ServoPlate2.stl | 6.5KB | |
| P39-ServoPlate3.stl | 33.3KB | |
| P39-ServoSide1.stl | 5.0KB | |
| P39-ServoSide2.stl | 5.0KB | |
| P39-SpinnerBack.stl | 263.3KB | |
| P39-SpinnerFront.stl | 736.3KB | |
| P39-TailL.stl | 100.6KB | |
| P39-TailR.stl | 102.4KB | |
| P39-TipL.stl | 159.5KB | |
| P39-TipR.stl | 159.6KB | |
| P39-WingL-Split1.stl | 551.2KB | |
| P39-WingL-Split2.stl | 293.2KB | |
| P39-WingL.stl | 302.3KB | |
| P39-WingR-Split1.stl | 549.8KB | |
| P39-WingR-Split2.stl | 293.6KB | |
| P39-WingR.stl | 302.7KB | |
| Version3-Notes.txt | 322.0B |
