Belgian Gates Aka Obstacle Cointet Aka Element C (1/100) 3D Printer Model
The file 'Belgian Gates Aka Obstacle Cointet Aka Element C (1/100) 3D Printer Model' is (stl) file type, size is 103.9KB.
The file 'Belgian Gates Aka Obstacle Cointet Aka Element C (1/100) 3D Printer Model' is (stl) file type, size is 103.9KB.
This is a simple remix of Pasquill's 15mm Belgian gate (or Obstacle Cointet or Element C) for resin printing. One version is simply assembled while another one is resized to match the correct size at 1/100 scale.
The whole model was stretched, no effort was made to keep the strut width consistent at this is meant for printing in large numbers, not for individual detailed structures.
For the width, I chose to ignore the connecting rings on either side of the structure as I intend to be print these at lower scales than 1/100. If connecting the gates in a long chain, you may want to add a 0.6mm rod (for 1/100) on either side to represent these.
The diagram shows the original, French version of the obstacle, without the thin vertical bars added to prevent infantry crossing through on the Belgian version. The second black & white photo shows a French version.
The original file is also included in case someone wants to tinker or compare.
| belgiumgate_original.stl | 107.6KB | |
| belgiumgate_original_assembled.stl | 107.6KB | |
| Cointet_assembled_resized_1-100.stl | 107.6KB |
