Bela Trill Bar Case And Accessories 3D Printer Model
The file 'Bela Trill Bar Case And Accessories 3D Printer Model' is (stl,dxf) file type, size is 1003.0KB.
The file 'Bela Trill Bar Case And Accessories 3D Printer Model' is (stl,dxf) file type, size is 1003.0KB.
Trim pieces for the Bela Trill Bar case provided here. Revised case and case bottom are provided in this repo.
Designed to aid in tactile feedback when used as an input device, like with Bamtna's Joyslide. I ported the logic from bamtna's repo to micropython and added capability for a haptic feedback motor. code can be found here.
Case body has 3 versions - no motor, Adafruit 1201 motor, and 7x25mm motor.
Case bottom has recessed holes for rubber feet to prevent it from sliding around.
Sketches as .dxf's for the extrusion profiles of the case and trim piece are provided as well. A trim blank is provided as .stl to design your own.
| case_body_-_7x25mm_motor.stl | 95.4KB | |
| case_body_-_Adafruit_1201_motor.stl | 91.1KB | |
| case_body_-_no_motor.stl | 55.6KB | |
| case_bottom.stl | 885.9KB | |
| case_profile_for_extrusion.dxf | 3.8KB | |
| trim_1.stl | 402.6KB | |
| trim_2.stl | 261.2KB | |
| trim_3.stl | 264.1KB | |
| trim_4.stl | 299.2KB | |
| trim_5a.stl | 257.5KB | |
| trim_5b.stl | 303.2KB | |
| trim_5c.stl | 261.0KB | |
| trim_6a.stl | 255.0KB | |
| trim_6b.stl | 258.3KB | |
| trim_6c.stl | 273.8KB | |
| trim_blank.stl | 256.9KB | |
| trim_profile_for_extrusion.dxf | 3.7KB |