Begode A2 Fairing 3D Printer Model
The file 'Begode A2 Fairing 3D Printer Model' is (3mf,stl) file type, size is 29.4MB.
The file 'Begode A2 Fairing 3D Printer Model' is (3mf,stl) file type, size is 29.4MB.
Fairing for the begode a2 from heraldomedeiros on Thingiverse that I remixed so you can print flat in 4 parts and mount your pads however you like !
Feel free to remix if you feel the need to. I applied Gorilla tape on the inside section so the parts wouldn't potentially come loose. So far the fairing has held up well with about 4 months of daily commuting in all weathers and lots of off-roading and a few crashes.
TPU 95A Setting
2 walls
4 bottom layers
5 top layers
10% gyroid infill
no support / no brim
Extra
use modifier on the screw holes for thicker wall so when you install the screws thigh, it doesn't compress the fairing in.
Extra point if you used a cool PEI sheet for a nice finish ;)
| A2_Left_Full.3mf | 1.9MB | |
| A2_Left_panel_1.stl | 16.4MB | |
| A2_Left_panel_2.stl | 18.7MB | |
| A2_Left_panel_3.stl | 18.5MB | |
| A2_Left_panel_4.stl | 18.6MB | |
| A2_Right_Full.3mf | 1.9MB | |
| A2_Right_panel_1.stl | 15.1MB | |
| A2_Right_panel_2.stl | 18.7MB | |
| A2_Right_panel_3.stl | 17.1MB | |
| A2_Right_panel_4.stl | 15.3MB |
