Beer Crate 3D Printer Model
The file 'Beer Crate 3D Printer Model' is (stl) file type, size is 6.4 MB.
The file 'Beer Crate 3D Printer Model' is (stl) file type, size is 6.4 MB.
Needed something to store my kids pixi books. I could not find anything I liked so I made this. It is modeled after an old Swedish beer crate. I have a model also with Pripps logo on it. Will upload as soon as I have tested it.
Internal dimensions 102*102mm, books are 100mm so it fits snug.
Printed without support.
Will take approx 50 grams of PLA and take about 10-11 hours to print.
201103: added a version with solid bottom if you want to use for snacks ;)
201220: added a model if you want to stack them. Just print and glue to the bottom. Print at 132% for beer can, 100% for normal
201223: added models for Carlsberg and tuborg, a square version that fits on the props back, and one version that has original proportions. But still will fit pixi books ;) I have not had time to print all version so please check before printing.
201229: added tuborg scaled for 4 beer cans. They are scaled and the details are made thinner so they should work without support. Please tell me if it does not=)
201230: added a correct Carlsberg scaled for 4 beer cans. First version was not correct. And also added a props scaled for 4 beer cans
210101: added crates with no logo for 4 beer cans. For people wanting to do their own logo. I think you can open stl files in tinkercad and add logo.
210104: versions with no logo and solid bottoms uploaded
| back_fyrkantig_beer_no_logo.stl |
| back_no_logo.stl |
| back_no_logo_solid_bottom.stl |
| back_pripps.stl |
| back_pripps_solid_bottom.stl |
| back_square_4_beer_carlsberg.stl |
| back_square_4_beer_no_logo_solid_bottom_dansk.stl |
| back_square_4_beer_pripps.stl |
| back_square_4_beer_pripps_no_logo.stl |
| back_square_4_beer_tuborg.stl |
| carlsberg_fyrkantig.stl |
| carlsberg_orginal.stl |
| stapla.stl |
| tuborg_fyrkantig.stl |
| tuborg_orginal.stl |
