This is a four bottle beer (or other drinks :)) carrier.
It works with 0,33l german longneck bottles. (61mm diameter)
To connect the carrier with the handle i used two 2mm x 35mm bolts and a matching nut.
If you feel like you need more then 4 bottles you can connect two of the carriers.
In that case there is a connector at the bottom of the carrier. Just put a screw through and fix it with a nut. Also, you have to print the longer handle.
I also added the older version of the carrier.
It spares some material, but the rings to keep the bottles in place are a little bit shaky.
If you want to print the old one you have to push the rings down from the top of the carrier.
Also, the connector is not working that well.
| carrier_old.stl | 554.0KB | |
| carrier_V2.stl | 1.6MB | |
| handle.stl | 5.1MB | |
| handle_x2.stl | 5.3MB |
