The file 'Bed Leveling Switch On Nozzle 3D Printer Model' is (stl) file type, size is 319.9KB.
Personal project in order to achieve auto-bed-leveling directly from the nozzle.
2 extra holes must be drilled on the mounting plate, use 6mm drill, clearance is important.
Additional hardware:
7x M3 nuts
2x M3 20mm screws
1x M3 22mm screw
2x M2 10mm screws
4x M3 12mm screws
2x Diam. 06mm Length 09mm squared & grounded springs
I used the stock Micro-Switch and the 2x M2 nuts from the z-axis endstop and the 4x M3 08mm from the mounting of the extruder.
Nozzle_Z_Switch_Lower.stl | 585.1KB | |
Nozzle_Z_Switch_Upper.stl | 397.2KB |