Frame size - 160x160mm, for bed 200x200mm (Prusa i3, Wanhao Duplicator i3).
The line width of the frame - 1 mm.
My Settings (Simplify 3D):
Nozzle - 0.4mm
Extrusion width - Auto/0.48mm
Primary layer height - 0.2mm
First layer height - 50% (0.1mm)
First layer width - 100%
No Raft
No Brim
Line wigth (1mm) include two line extrusion (0.48mm). When you print, the both lines must be glued together (one broad line without gap).
| Frame.stl | 92.5KB | |
| Frame_Circle.stl | 530.5KB | |
| Frame_Circle_Rectangle.stl | 557.3KB |
