requires:
6mm ball bearings, 15 of them
2.5mm drill
3mm tap for plug set screw and collar set screw
3mm set screw x1 , ( x3 if using collared inner raceway)
Instructions:
print on flat side horizontally, for smooth raceway
drill 2.5mm into plug hole, and tap for 3mm set screw
push balls into hexagon hole
plug hole with hexagon plug and screw 3mm into plug
| hexshaft_6R.stl | 1.3KB | |
| inner-10.4r-hex_TEP_RTP.stl | 445.8KB | |
| inner-extended_RTP.stl | 1.9MB | |
| inner_ID-20.20.stl | 800.1KB | |
| outer_RTP.stl | 949.1KB | |
| plug_RTP.stl | 43.4KB |
